The following fixtures are missing from the ScanLibrary:

- Chauvet Vue II
- American DJ Snapshot DMX With Dimmer
- American DJ Raider
- Chauvet HZ-1000 Ultimate Haze

The above missing fixtures are the left over DMX items I have that I'd like to add my light show. The Chauvet HZ-1000 is a fogger/haze machine.

If I have a little time tonight I can start making some profiles for you. If I don't, then jingles will. He probably will anyways. So either me or jingles will get you something soon!

jthtiger

Much appreciated.

gonzo shoot me a email at jamesk AT elationlighting DOT com. also the raider is a s.a. light i didnt see any DMX channel for it so use the channel on a switch pack. and the snapshot also use the channel for a switch pack. if it is a one channel light that hooks into a dimmer pack then i cannot make a profile for it. you would just have to add a generic or a par to that channel. i could try though. gonzo mail me and i can elaborate more. peace! jingles.

I have a similar question, so that's why I add it here.

I would like to make my own profiles for lights, but here goes my thoughts.

Missing stuff I need:
Chauvet(sorry):
Q-Spot 150
400-G spotlights

Also, now excuse my strangeness:
Par 38's and really any Par fixture, non-DMX
Should have a feature to specify gel and color or no gel. I would think adding the gel would require a new release of MyDMX.

Hi_Tech effects:
Specificall, Mystic, Sunray III, Electra, Rover II, Reflect, barrel Flex, Double Twist, Trilogy, Vertigo.
Mirror ball motor? Projector 150?

Don't have to be all fully rendered and animated, but I find they are needed to help design shows. Since I have to deal with band and dancing, I have to be able to deal with both. So, I have to mix the old with the new. It's not so much I need to see the show working, but rather know what I'm calling up, when where and why.

Or how about this concept:
Dimmable fixture, with being able to be named and colored/gel'ed

On/Off fixture(light the high tech effects), with ability to be named?

I mean, my other option is to run 2 DMX runs. 1 from the MyDMX box, and the other from my DMX Operator.

Remember, not all of us are on 100% DMX-controllable lights, but through dimmer, switching and relay packs, we can get there.

i can answer all this simply:
all the non dmx effects that are sound active or run on a dimmer/switch pack get assigned as a either generic 1 channel dimmer profile or a par can profile to the corresponding address on the switch pack for that light. and to add color to the pars. open the construction mode on your 3D visualiser and open the folder for the par can u wish to add a gel or color too and click on the paint bucket. and then a window will pop open and from there you will be able to select the color. add that to your custom colors and then select OK. any questions? post em here. sincerely,

Well, I'm nearly done.

I spent today making 4 profiles for my Chauvet Q-Spot 150's(which will work with the Chauvet Q-Spot as well). I'm gonna fire them up in a bit to see if I can match up the Gobo's in a while.

Making one's own profiles for fixtures isn't really super easy, but if you take some time, it can happen.

I just bought it, I should have it in a couple of weeks(with a lot of other stuff). best part: Won't take up room in the truck! Right on!

hey chris email me a profile you have made and I'll check it out and see how you did ok? You got my info right?

I'm finishing up.

I did 4 profiles for the Chauvet Q-Spot 150, which applies for the Q-spot as well. There are 4 different operation modes, so I had to make adjustments. Thank goodness for copy and paste!

Getting the errors fixed was a bit of a pain, but that's my own inexperience with lighting terminology. I got so frustrated that I blew out the problem settng and went step by step again. While it was a lot of extra work, it was worth it to understand how it works.

I forgot to do something today. I brought the fixture into the house with my DMX Operator and was going through the mode I prefer to use, and going through to gobos so I can try a semi-accurate picture. Would be cool if I knew enough about PhotoShop to make my own images for use with the MyDMX software, but I found stuff sufficient enough to get the job done. So, I not only put an appropriate gobo setting into the profile, but took a picture as well for reference. But, I failed to examine another area on the same fader's range, so I'll repeat the process on Friday.

The Intimidator Color profile is done. The Followspot 400G is also done.

And yes, I made myself a Par 38! Yeah! What I'd like to see are simple profiles for the "high tech effects" so we can just add them in. Don't need super animation, but it would be nice to just round it out. Complete model.

I am finding limitations within the demo version, but perhaps the purchased version coming my way soon gets around that.

I'll send those profiles off on Friday night. Should be nice and neat. Now I'm getting new ideas:
Design on my desktop since I have that resolution cranked and it's a big beefy machine. Then,just load the shows onto my laptop, which is a bit underpowered but well within specs. Just below minimum, but I won't need visualizations live at this point. I'm planning a new set of laptops soon(1 Mac Pro and 1 butt-kicker PC) so I'm good for live.

I don't see my DMX Operator leaving my rig any time soon, but I do see that if I get 1 show where I can use myDMX, I can get video of that online and pretty much guarantee more calls. Plus, I can charge for custom show design, or if they have a show designer, that guy can operate it.

I just bought my dmx software, but i can't find my new lights
American DJ Revo Roll LED
American DJ Revo Scan LED

is it possible to add it to the list or how can i install this lights to the software?

hey welcome. ill be sending out those profiles to you here shortly. once you get the email save them to c:/MYDMX/scanlibrary/americandj/ "file names" ok? or just save em to tour desktop and then open the my dmx scan library then open the ADJ folder and then drag em there. let me know if u need more help. sincerely,

K thanks i'll wait for the update,....i have the party this weekend so hopefully i can figure it out by tonight or tomorrow morning
thanks again!

i believe i mailed them to you already did u get them?

nope!!! =(

jccalmet@hotmail.com

i just resent them. check your mail that u used to sign up on this forum. and your bulk mail. sincerely,

no brother i havent' received anything yet...man it's 2:30 am i can't figure it out yet....
this is the same email that i got when i register...
jccalmet@hotmail.com

if you can please call me (305) 562-3854
JC

ill try sending it from my yahoo account.

all right JC have fun. take pics of your party and post em!!
sincerely,
jingles!

thanks so much for the call brother...i'm playing with the system so i can figure it out ...take care you are the man!

I have 2 questions:
1.- how can you create a light stand on the software? i want to create my own but the demo comes up with a circle on top and stands on the side...etc i have a regular odyssey light stand

2.- if i add my lights on the DMX will i have to set up on the same order? ex: i will drag and drop like this..1-7 LED Scanner, 8-10 mega strobe, 11-17 P64 LED....will this means that i have to set up in the same exact order? or can i just mix the lights on the stand and nothing will change?