Hi -

I have a technical support question:

I am trying to control 2 ADJ megabar LED units through MyDMX.

Both LED units respond to MyDMX faders, etc. when in slave mode. However, when I put the units in DMX mode, they no loger respond to MyDMX. The units are set to "D-P3" for 11 channel mode. I've given one unit the address "d.001" and the other "d.002". In MyDMX, there are 2 11-channel units assigned to dmx channels 1-11 and 12-22 respectively.

How can I get both LED units to respond independently to signals from MyDMX? What should the settings be in MyDMX? On the Megabar LED units?

Thank you for your support!

what is the d.002? i dont see that anywhere in the manual. let me know. Sincerely,

James-

Thank you for the very fast reply ! I'm very new to dmx, so I highly appreciate the support.

"d.002" is just the channel number, I think. On the MegabarLed, if you hit the mode button you can select the operational mode for the megabar : "Auto", "SA31" (operation by sound), "Slave", and "d.xxx" (for dmx, xxx can be in the range of 001 - 512, and can be changed by hitting the up/down bottons on the megabar).

When in "slave" mode the megabars respond fine to mydmx, however, I can't seem to program them as two seperate units. What would be the settings I need on the megabarled and in mydmx to be able to program the two bars seperately.

Thank you !

Dave

Well on my dmx just keep it as you have it for the profiles. but change the d.002 to d.012. has to match the starting address i assume. that is weird if it responds to DMX in slave mode. i would def. call up tech support monday morning if it is still doing that. also are you using a terminator? Sincerely,