Hi James. There are actually 3 similar profiles - X-MOVE LED, X-MOVE LED rev.1 & X-MOVE LED rev.2.
The closest to the X-MOVE Plus is the rev.2 which I have amended slightly to suit the Plus. Since i cannot see a way to attach it here i will mail it to you for future reference.
Cheers
AndyH

what have you amended? Let me know the changes.

Hi James,
Minor changes as follows:-
Gobo Channel (4)
DMX Channels 64-71 changed to "Open Shake"
DMX Channels 72-78 changed to "Gobo Shake"
DMX Channels 79-85 changed to "Gobo Shake"
Shutter Channel (5)
DMX Channels 140-181 changed to 140-180
DMX Channels 182-189 changed to 181-190
DMX Channels 190-232 changed to 191-231.

Cheers
AndyH

Sounds good but let me correct you. Channel 4 VALUES 64-71, etc. Just trying to get us all on the same page without any misinformation spread. not trying to be a nerd that corrects everyone's mistakes. haha
Sincerely,

Hi James,

Sorry, whats the problem with my changes to Channel 4, Gobo. According to the User Instructions the DMX Channels are as per my changes?

Andy

James,
Sorry I see what you are saying now!!
I have called them DMX Channels as opposed to Values........


Thanks
AndyH

One last note re this profile - I am not sure the colours are in the correct order. My 4 X-Move plus's are due to arrive tomorrow (Friday) so I will check then and make any changes if need be.

AndyH

Well why mess with the profile before it is tested on the actual units? I will do more testing at LDI if time permits. Thanks though. Keep me posted.
Sincerely,

OOOH SORRY!!!!
I haven't "Messed" with this profile before it is tested, I have modified an old profile to suit a new fixture for which a profile doesn't exist. These changes were made inaccordance with the DMX Traits from the Instruction Manual, the source of any new profile.
If you don't like it, delete it.

I'm sorry I didn't mean to be rude at all. Or upset you. I assumed you were making changes to the profile cause you already had your lights and found errors with the traits from the manual to the actual working units. Suppose that's what I get for assuming. lol. Didn't mean any disrespect. The traits from the x move and the x move plus are identical according to the manual so there is no need for a "New" profile unless someone finds some changes. I know our manuals are sometimes off. Let me know what you find and again I do apologize.
Sincerely,

hi can you help with a laser-uk rainbow vision
http://www.laser-uk.co.uk/imag.../Vision%20Manual.pdf

I am actually right now sitting in a plane waiting for it to leave to go to Orlando. I will see if I can make it for you tonight If it is not too hard. I'll be at ldi.
sincerely,

hi jingles did you get a chance to do a profile for the laser-uk rainbow vison ?
thanks andy

Personally, as much as I like and "trust" the 3D Visualizer with MyDMX, I don't trust profiles until they've been tested.

My recent example involves properly configuring and oriented my Chauvet Q-Spot 150's so they match what the 3D Visualizer shows.

It's tough to work on profiles for lights you don't have. Only way anyone trying to help you out is educated trial and error. I also think it would be a nice idea to produce a manual that documents the Library Editor. I also realize due to how much stuff there is available it might be very difficult to to document the whole thing. I've also noticed here that many users requesting profiles who have noted errors are often being quite helpful in provided graphic descriptions to help Jingles make the necessary corrects. Along those lines, I want to point out DJ-Andy, who is asking for help wiht a specific light AND is providing a direct link to the manual to help Jingles have easier access to resources.

I also encourage new users to mess around with profiles, or at least copies of profiles. I don't like having to rely on anyone else for help. I behave a lot like my own island at sea because I have to be as self-reliant as possible. I sometimes do tours, or I am on-site and I don't have time to SMS or IM someone or even call to get help.

We all benefit from working together here. As a community, we've done a lot to help outselves on supporting new lights for MyDMX.

I did not. I apologize. LDI was way busier than I thought. There just wasn't enough hours in my days out there. Haha. I will do them asap on Monday. Again. Sorry.
Sincerely,

James,
Apologies accepted. The profile for the x-move plus is certainly (slightly) different to the ones already in the library. I now have my x-move plus's and have tested my amanded profile. I have also corrected the colour order and i can confirm this profile is working correctly. It does give a beam warning in Editor, stating that the beam is not open by default but (as far as i can tell) that IS the case. Channel 5, the Shutter/Strobe channel values 0-7 is blackout - values 8-15 are open. Let me know if the beam warning refers to something else?
I will mail you the profile.
Regards,
AndyH

Ok thanks Andy. I'll have a look at it all when I return from my trip from ldi later tonight.
Also I wanna say we took a bunch of ADJ fixtures and one chauvet fixture and had a shoot out. I'll post the picture when I get home. I wanna see who can tell me which one is brightest from the list of choices.

Sincerely,

James,
I can def confirm that the new x-moves are brighter than the Acme Genesis (which are now for sale!)

AndyH

Haha well you should know by now from watching cartoons like bugs bunny and wile E. Coyote that Acme stuff is never that good. Haha.

Sincerely,

lol!
I guess that means you don't want to buy them !!!