I got two of these lights and just ordered two more. I've always used them in Master/Slave mode and they worked fine. But now I used them both as stand alone in sound active mode and one is perfect. It's very sensitive to sound while the other one will rarely do anything. Settings are the same on both with sensitivity turned all the way up to 31 (the max). It seems that when I was using them in Master/Slave, I must have set the good one as the master.

So, is there anything I can do or take apart to fix this issue with the sensitivity with the one par?

Thanks,
Alan

Ensure both are now set as masters and they are not connected to each other via any sort of data connection and try again.

Also, swich them as far as roles as master/slave and see where the problem may be. It might just be a simple setting mistake.

I did all that, Chris. Got them both in stand alone Sound Active Mode. They are not connected to each other. Like I said, one is super sensitive to the beat and the other will change only so often. So, can it be the microphone in the one isn't that good.

could be your best bet is to call our service dept for more straight answers. The number is listed under the contact us section on the adj homepage.
Sincerely,