Hello all,

I have just gotten a P64 LED fixture and I'm trying to get it set up. I have a Leprecon LP-X24 light board, and I've already set up the 'instrument'. What I can't seem to be able to find is how to set the DIP switches to set the beginning DMX address. If anyone knows how to set them, or has a diagram I'd really appreciate it.

Thanks.

Well what channel are you starting at for them?

Let me know if that helps. Sincerely,

It needs to start anywhere after channel 165, so 166+. But, on the back there are only 8 switches, and the first one is to activate DMX mode. So, will that just bump the numbers back?

Like:
2->1
3->2
4->4
5->8
etc to:
8->64?

Which even if all of them are on that's only up to 127, so I guess I'll have to try and get it below our MAC 500s.

it doesn't bump them back. So just do the addresses like the pic I posted shows you the numbers. Welcome to the forums. Sincerely,

Ok cool, thanks very much!

Wait is this an american dj par 64 LED? cause all fixtures that have dip switches should have minimum of 9. not 8. let me know wassup. Sincerely,

Yeah, apparently from looking at the site, this is an older version that only has 8 dip-switches. But, it is the P64 LED.

Ddreier,
You're right. You have an older version and it will only allow you to address up to channel 127.