I have 2 accu spot 250 & 1 accu spot 250 II
,I am using a Freekie dmx controller .

I want to run all 3 in different channels ,so I need to know wich will be the right addres for each one.

I know fixture 1 wll be addres 1 , fixture 2 will be addres # 13 ,& fixture 3 will be addres #25 right?

I n the accu spot 250 II owners manual in the rdmx seccion says:
The unit will be shipped preset in 16 increments from the factory .
According to this fixture 1 = #1 fixture 2 = #17
and fixture3 =#34 ???

Please I need help in getting the right addres for my lights , also I need to know the value of the dimmer in 8 channel operation.
And the dimmer value for the accu spot 250 Please??

Some body help me!!

This information should be covered in the product manuals that shipped with the fixtures or you can download the respective manuals from the product pages. cheek that out first then if you still need help let me know.
Welcome to the forums.
Sincerely,

I did read all the manual & looked at adj.com
but did not help.
I need to know the actual dmx addres for the accu spot 250 & 250 II.

Also they dont have the dimmer value for the accu spot 250 and accu spot 250 II in 8 channels set up.

I really need help on this please.

Thank you !
Rene.

The 250's i believe don't have a dimmer value. It was not something that was introduced to the series until after the 250 II.

for the 250 II's you have the option for 8 channel mode or 9 channel mode.

So first address at 8 channels is fx 1=1 fx 2=9 fx 3 (Reg Spot 250) would be 17.

So Second address at 9 channels is fx 1=1 fx 2=10 fx 3 (Reg Spot 250) would be 20. Make sense? It's simply basic math. Just gotta wrap your head around it.
Sincerely,

sincerely,

Thank you for the tip, I am going to try it .

I will let you know what happen .

Regards!