the fixture itself worked fine, and then decided to stop putting out light all together, it reacts to the controller, and moves with the commands sent to it, it just has no light output, i have tried a new bulb, and a new fuse, any suggestions?

sounds like something inside broke down on you. Give our service dept. A call tommorrow between 8-5pm pacific time. Sincerely,

fook, this is the second one that has done this in 2 weeks... back to guitar center i think. thanks for such a quick response, and i will call the service dept first thing in the morning.

I would really spend the extra cash and get accu heads. Either 250II or 300's. I don't know your budget but its worth it. By the way what did the last one do?? Sincerely,

the other one did the same thing, limited light output, then none all together. i would have gone with upgraded fixtures, but do not have room in the budget for the upgrades, i just worry about their capacity to stand up to a month of touring... in their defense, short of rotating gobos, these things work amazingly, and look fantastic when they are working.

i have this same issue with my Deluxe Scan 250s

After maybe 20 hours of low light output they quit all together. Pan and tilt fine can hear the gobos turning but no lamp. I have 2 that have done this now.

Any new info on this issue?

Are you running the lights for 20 hours straight?

NO, this was over a 3 month period of shows. They ran mabye 4 to 5 hour per.